This open style round groove series is recommended for use in locations that require a relatively small bearing to provide unusual capacity and life for its size. The balls are retained between two thick hardened steel races with deep round grooves and held together by a center rivet. The one piece design of the T-114-RG series offers easy installation. The open style allows maximum circulation of lubricating products.

Auburn Open Style T-114-RG Ball Thrust Bearing answers the need for an easily installed bearing requiring a minimum amount of machine work for its use. The small pitch diameter of the ball grooves for a given shaft diameter, and the large diameter balls used give a relatively low peripheral ball speed. This, together with the heavy washer sections and deep grooves, result; in a bearing of unusual capacity and life for its size. It is self-contained; the two races and balls are held together as a unit by the center pin.

• Ball Thrust Bearing
• Open Style
• Self Contained
• Round Grooves

Ball Thrust Bearing Mounting Instructions

Open Style T-114-RG Ball Thrust Bearing fits at the end of the shaft in the journal bearing or housing. The bearing dimensions are designed to be slightly less than the usual diameters of standard shafts. This is to provide full contact and still allow for bearing clearance. Diameter “B” seats against the stationary end of the bearing housing, and diameter “B'” is placed against the end of the rotating shaft.