Thrust Bearings

Dimensions/Specs.
SC-114-RG
View Dimensions/Specs. in HTML
View Dimensions/Specs. in PDF
Get Adobe Reader

SC-114-RG: Totally Enclosed Thrust Bearing

This totally enclosed style series is recommended for use in exposed locations where protection from foreign matter is required. The one piece design answers the need for an easily installed bearing requiring a minimum of machine work for its use. The balls are retained between two hardened steel races banded together by a mild steel or brass sleeve on the outside diameter. The round grooved raceways combine with thick race sections to provide unusual capacity and life for its overall size.

Auburn Enclosed Style SC-114-RG Ball Thrust Bearing answers the need for an easily installed bearing requiring a minimum of machine work for its use. The small pitch diameter of the ball grooves for a given shaft diameter, and the large diameter balls used give a relatively low peripheral ball speed. This together with the heavy race sections and deep grooves result in a bearing of unusual capacity and life for its size. It is a self-contained totally enclosed unit and is recommended for use in exposed locations where protection from foreign matter is required.

  • Ball Thrust Bearing
  • Totally Enclosed
  • Self Contained
  • Round Grooves

Ball Thrust Bearing Mounting Instructions

SC-114-RG Diagram Enclosed Style SC-114-RG Ball Thrust Bearing is generally installed so that the race with the sleeve attached to it seats against a fixed part of the machine and is stationary.

DIMENSIONS IN INCHES THRUST LOAD CAPACITY IN LBS.
AT VARIOUS SPEEDS
Bearing
Number
B
Outside
Diameter
B
Tolerance
+.000
H
Height
H Tolerance
+ or -
Balls
No. - Size
Bearing
Weight in Lbs.
5
RPM
25
RPM
50
RPM
100
RPM
300
RPM
500
RPM
1000
RPM
1500
RPM
SC-0010 5/8 -.002 7/16 .005 6 - 5/32 .02 840 515 420 340 245 210 170 150
SC-0011 11/16 -.002 1/2 .005 6 - 3/16 .05 1185 730 590 480 345 295 240 210
SC-0012 3/4 -.002 9/16 .005 5 - 7/32 .06 1345 825 670 545 390 335 275 240
SC-0013 13/16 -.002 5/8 .005 5 - 1/4 .08 1735 1070 870 705 505 435 355 310
SC-0014 7/8 -.002 11/16 .005 6 - 1/4 .11 2035 1250 1015 825 590 510 415 365
SC-0015 15/16 -.002 3/4 .005 5 - 9/32 .12 2155 1330 1080 875 630 540 440 385
SC-1000 1 -.003 3/4 .005 6 - 9/32 .14 2540 1565 1270 1030 740 635 515 455
SC-1001 1 1/16 -.003 7/8 .005 5 - 11/32 .19 3115 1920 1560 1265 910 780 635 560
SC-1002 1 1/8 -.003 7/8 .005 5 - 11/32 .25 3115 1920 1560 1265 910 780 635 560
SC-1003 1 3/16 -.003 15/16 .005 5 - 3/8 .26 3660 2255 1830 1485 1065 915 750 660
SC-1007 1 7/16 -.004 1 3/16 .005 6 - 9/32 .46 4990 3075 2495 2025 1455 1250 1015 890
SC-1011 1 11/16 -.004 1 1/4 .005 5 - 9/16 .69 7590 4675 3795 3080 2215 1900 1540 1365
SC-1015 1 15/16 -.005 1 5/16 .005 5 - 5/8 .92 9140 5630 4570 3710 2665 2285 1855 1645
SC-2003 2 3/16 -.006 1 11/16 .005 5 - 3/4 1.66 12540 7725 6270 5090 3655 3135 2545 2255
SC-2007 2 7/16 -.006 1 7/8 .005 5 - 13/16 2.24 14380 8855 7190 5835 4190 3595 2920 2580
SC-2012 2 3/4 -.007 2 1/4 .005 6 - 27/32 3.26 18050 11120 9025 7325 5260 4510 3665 3245
SC-2015 2 15/16 -.008 2 1/2 .005 5 - 1 3.65 20400 12570 10200 8280 5950 5100 4140 3665
SC-3003 3 3/16 -.008 2 5/8 .005 5 - 1 1/16 5.46 22520 13875 11260 9140 6565 5630 4570 4045
SC-3007 3 7/16 -.009 2 13/16 .005 6 - 1 1/16 6.25 26540 16350 13270 10770 7735 6635 5385 4770
SC-3015 3 15/16 -.010 2 3/4 .005 6 - 1 1/4 8.41 34570 21295 17235 14030 10080 8645 7015 6210